Charge Separation

  • Topic Is Sticky
  • 146 Views
  • Last Post 09 January 2018
Chris posted this 06 January 2018

 

Charge is separated, Positive to one terminal and Negative to the other terminal, or some may say Negative to one Terminal and none to the other. This, nitty gritty is a topic for another day...

 

The answer lays in the Capacitor, does each plate hold a Charge, and is it equal and opposite?

Any and all processes that separate Charge, function as a "Generator", or I personally prefer, as T. H. Moray termed, this process is a Pump...

Battery's Separate Charge via Chemical imbalance, of course they need to be charged to store charge!

Capacitors also the same...

Solar Cell's the same, Photoelectric Charge Separation...

Electro-Static Charge Separation, an example, again, that all should be familiar with:

 

An Antenna also works on the Separation of Charge, one end must be Positive, while the other is either neutral or Negative, depending on the wavelength used: 

 

Either 1/4 wavelength:

or 1/2 wavelength:

Alianse77's example, Electricity from ionisation, is yet another excellent example, showing the importance of Charge Separation!

Thanks for sharing!

   Chris

 

Order By: Standard | Newest | Votes
Chris posted this 07 January 2018

 

A moving Magnetic Field in the Proximity to a Conductor Separates Charge: Flux Cutting: E.M.F = Bvl

 

And also: Flux Linking: E.M.F = -NdPhi/dt

 

We know from The Mr Preva Experiment and Floyd Sweet, and also Clemente Figuera, that Current, the very flow of Charges can be increased, or amplified:

 

In the specific case of positive charges moving to the right and negative charges to the left, the effect of both actions is positive charge moving to the right.

Current to the right is: I = da+ / dt + da- / dt.


Negative electrons flowing to the left contribute to the current flowing to the right.

Floyd "Sparky" Sweet

 

The voltage from the total current of the current dynamos is the sum of partial induced currents born in each one of the turns of the induced. Therefore it matters little to these induced currents if they were obtained by the turning of the induced, or by the variation of the magnetic flux that runs through them; but in the first case, a greater source of mechanical work than obtained electricity is required, and in the second case, the force necessary to achieve the variation of flux is so insignificant that it can be derived without any inconvenience, from the one supplied by the machine.

Clemente Figuera

Steven Mark, listen carefully:

 

Ruslan Kulabuhov, read the translation:

 

The very Copper Wire you wind on your Core is the source of Electrical Energy you look for, its static, we must "Pump" the Charges as T. H. Moray said.

Its all in the design and function of your System, I pointed out a long time ago 4+ years ago, the system you need to aim for works almost exactly the same as the Hydraulic Ram Pump:

 

 

 

 

A self running machine, that works on the Inverse Square Law principles. As shown in The Mr Preva experiment, Current is a function of the Opposing Magnetic Fields, and Voltage is Turns and the rate of Change of the Magnetic Fields.

The Secret is truly revealed:

 

I may tell a small storey of how I found this soon...

   Chris

  • Liked by
  • Wistiti
Chris posted this 08 January 2018

So you know, my friends, in the years I have been trying to get this out to people, I have dealt with a lot, a LOT of stupid!

A portion of people researching, or that say they are researching this field, including some of the smartest people out there, have absolutely ZERO knowledge on what we have already covered: How to "Generate" Electrical Energy

A good portion do not even know what Electrical Energy is! EE's of 30+ years, they know how to measure it, they know about Positive and Negative, but have ZERO Idea on how the Positive's and Negative's are produced!

Zero Idea on most all of what we have covered for many years now!

I meet lots of nice people, some not so nice, but must say, in particular, a lot of the YouTube Comments I get are borderline senseless and should be able to be answered by someone that is actively researching this field.

I do try to have patience, and I do realise we are all at different stages of learning.

So, for these reasons, I ask, please understand why I repeat myself a lot. Please understand, other than the names I have mentioned, none have given you Bucking Coils, or Partnered Output Coils! None have taken the time to lay a massive trail, all over the internet on the How's and Why's!

Experiments I have posted to various places over the years, that were not understood then, are now being understood by You, that have done your homework and learnt the importance of Opposing Fields!

I have done the best I can to try to keep all stages of learning satisfied, to present Solid, Hard Data with References, and I also still encourage all to Cross Reference all my References also! Don't take my word on what I say, check for yourself!

It is true, we are Light Years ahead of all other forums!

   Chris

  • Liked by
  • Wistiti
Chris posted this 09 January 2018


A long time ago, in a galaxy far far away...

Ok, not so far away actually back here on Earth, at my home, I do the Vacuuming around the house. A long time ago I went to press the on button on my Vacuum Cleaner and just tapped it with my foot, fast and not with a solid push, and my Vacuum cleaner popped, a hydraulicing and a arching noise and no more Vacuuming on this particular day...

As a kid I always took everything apart, never got anything cool or expensive for Xmas or birthday because I "destroyed" everything, always interested to see how things worked, so true to nature I explored this popped vacuum cleaner...

I took the Vacuum Cleaner apart. In the housing I found a wire had completely disintegrated, about a centimetre and a half, completely gone, nowhere to be found. It was right on the terminal, off one of the Stator Coils.

I very much wish I have documented this, took pictures and so on, but alas I did not.

Many I have told do not believe me about this.

Anyway, sure enough the Current to achieve such a thing must have been huge, more than the 10 amp fuse could bare to handle, but no fuse popped, in-fact a closer look at the power board showed no sign of anything strange going on. This issue was completely isolated to the Vacuum Cleaner as far as I could see.

That feeling inside, when you see something and seem to have an immediate understanding, I got that, mentally seeing a large Magnetic Field Build, and because I did not switch on properly, a huge collapse, and the Could just happened to be in a configuration that shorted the huge collapse back on itself.

Thus, a huge "Generation" of Electrical Energy...

Many years later, I learned that an Antenna can sometimes see a similar thing under certain circumstances. Very high Currents can occur and then at a particular point, there is a Burn Out...

Over the years learning more and more, connecting the dots, I made progress and understood more.

I hope this gives some insight as it did for me!

   Chris

 

Close