MIT - Graham Gunderson

  • Topic Is Sticky
  • 888 Views
  • Last Post 15 February 2018
Chris posted this 07 July 2017

Perhaps the best Above Unity demonstration ever done, Graham Gunderson, a person I have known for a few decades now, has, for sometime now, had several Working Devices and has demonstrated some.

The MIT was shown to produce a COP > 4

 

With 8 Watts output and only 2 Watts input, measured, Accurately, on both Tektronix Oscilloscope and also Clarke-Hess Power Analysers - Very Expensive, world class Test Equipment!

Graham has also demonstrated other devices, similar:

 

This device was also shown at one of the Conferences, and measured to be Above Unity!

Graham is a first class engineer, he has spent much of his working career measuring devices, Metrology is his profession!

   Chris

  • Liked by
  • Wistiti
Order By: Standard | Newest | Votes
Chris posted this 07 July 2017

Some images were kindly shared, by Reiyuki - Close Ups of the Partnered Output Coils:

Originals via Google Drive

 

documents-export-2016-07-12.zip( 68.5 MB )

documents-export-2016-07-19.zip( 111 MB )

 

   Chris

  • Liked by
  • Antimony
Chris posted this 12 July 2017

 

By looking at the Current Wave Forms, one can see what's going on in the Core, Hysteresis, this is Electromagnetic Induction.

Below, in light Green, we see the one of the Output Current Wave Forms:

The wave itself looks like this: 

 You can see, the Current changes Polarity, Very Fast, almost at Mid Cycle: (Green Arrow)

A lot os questions can be asked, most all have very simple answers! 

From the Peak of the Current Wave form, where it Very quickly changes polarity, to the actual change in polarity, is about 4 Micro Seconds. Very fast!

Because we know that Graham Gunderson uses Partnered Output Coils, and we know that the Coil being measured, Flips polarity, very quickly close to the Peak Current, we know at this Point that the Magnetic Fields Oppose, as the Currents must also Oppose at this point, between the two Output Coils.

Graham is holding the Coil Polarity in one Direction, until close to Top Dead Centre of the Current Wave Form, then Dropping the Polarity with a Switch, a Mosfet. This circuit we know already:

It turns out, this is a similar method of Operation as Bradleys RT. This is a type of Resonance, where we are bringing about, by means of a Timed Response, Maximum Electromagnetic Induction for Minimum Input. The Input is doing work on the Core, and getting Electrons Flowing in the Coils, but then the Polarity Flips and this is when the Magic Happens.

Note, this is a 1/4 Wavelength, you may see some Correlation to this Image now:

 

You can read more here: Electromagnetic Waves if you want more information.

   Chris

  • Liked by
  • Wistiti
alohalaoha posted this 12 July 2017

Too little output power for a such big device. Lot of cooper, ferrite and expensive transistors and components for such misery little output. No need to mention oscilloscopes and power analysers worth 50 000 bucks,

Floyd Sweet's VTA have had almost the same dimensions but real 5 kwt output power.

This is what I calling real overunity machine - VTA and real first class engineer Sparky Sweet.

i think we need to concentrate our mind power on VTA and similar class high power devices

Aloha

  • Liked by
  • Chris
Chris posted this 12 July 2017

This is true, but we must remember, Floyd Sweets first version was 6-19 Watts!

Scaling is easy, knowing the basic principles and how to get there are critical.

The Concepts are exactly the same.

   Chris

  • Liked by
  • Wistiti
Chris posted this 20 July 2017

Its not very often Opportunity Knocks! It is smart to grasp it, hold it and not let it go!

Team, Graham Gunderson has given us the absolute best Demonstaration in History. This is an opportunity we should never let go!

I have purchased the Video, but because of Copyright, I can not rebroadcast it. The Video can be purchased here - Don't make Aaron rich though! Don't buy it!

We could do some private thing that does not break Copyright? Viewing only privately? Any Ideas?

Team, a Lot can be learnt here! Graham's Device is almost exactly the same as Bradleys RT! They work the same.

   Chris

P.S: Why do I say this? I don't have the equipment or the level of Expertise that Graham has to take these sort of Measurements. I know it works, and can talk till I am blue in the face, but people like to see Independent Replications, then this is the best ever!

  • Liked by
  • Vasile
  • Antimony
Vasile posted this 20 July 2017

I have little spare time but I want to help.With the hope that we will find a working principle,you can count me in.

  • Liked by
  • Wistiti
  • Chris
Zanzal posted this 20 July 2017

We could do some private thing that does not break Copyright? Viewing only privately? Any Ideas?

I believe you can show it privately in a non-commercial setting say to a guest in your home. IMO, you should not take risks and its also a matter of politeness to respect a copyright even if you don't agree with not having shared the information freely. However, you might check the video for metadata you can plug into google and see if someone else already put it up. When it comes to sharing digital information you should also not assume that the sharer cannot be identified.. Digitally watermarking (using stenography) the video with information identifying the purchaser is something I would do if it was my business model.

  • Liked by
  • Chris
alohalaoha posted this 20 July 2017

Chris Sykes,

Put that and similar kind videos for example Floyd Sweet, Stiven Mark, .... at https://yadi.sk

Make it private flag, and share only shortlinks to them. Who need it could copy on own https://yadi.sk video space or download to own computer for further analysis.

Aloha

  • Liked by
  • Chris
Chris posted this 20 July 2017

I have little spare time but I want to help.With the hope that we will find a working principle,you can count me in.

 

@Vaslie - I can assure you, the principle I am sharing with you all, works!

  • Graham (This Thread) and Bradley's RT use it!
  • It does take some understanding.
  • It is a process that follows all the standard Science Principles. Lenz's Law, Electromagnetic Induction and so on.
  • It is a process that can be cross referenced many times on my Site starting here: Support
  • It is fairly simple, once understood, but still requires some work to make work.

What is the Principle?

We have covered this many times in many different places, but basically:

  • There must be Three Fields, or Sources of interaction. Two is Symmetrical, Three is Asymmetrical and therefore, Newtons Laws of Motion: For every Action there is an equal and opposite Reaction and there for an equal and opposite Counter-Reaction for this Reaction
  • Two Fields must be from Two Secondary Coils.
  • One Field must be a small Exciter Field, designed to bring about Field Opposition of the other Two Fields.
  • What does this look like?

 

Once realised, you will see this EVERYWHERE! it is present in all the devices I reference on my Website! It just takes some seeing!

I call them Partnered Output Coils!

 

 

  • Liked by
  • Wistiti
  • Antimony
alohalaoha posted this 21 July 2017

Hi Chris

NOT ALL SO EASY AT FIRST GLANCE. AS YOU THINK.!!!!

Problem of mutual interaction of Vector magnetic potentials A of both partnered-bucking type Hooper coils is begining of story for free energy extraction from highly organized forms of plasma from higher octaves of reality.

Well CHRIS, there is one very big problem with every single transformer whatever how he was wounded and connected. Problem is that there really exist - ENERGO-INFORMATION COPY - of every single transfor, known as MATRI-X'S FANTOM of transformer. He has fine ENERGO-INFORMATION structure at sub femto levels.

 

THE FANTOM

HE IS A MAIN MATRI-X's BLOCK for free energy extraction from A potentials as pure energy sources.

Chris, bring G.Gunderson here to show him how to unblock his device and how to shield MATRI-X's FANTOM in his transformer.

NOT ONLY TRANSFORMERS HAVE OWN FANTOMS - CHRIS. THE PEOPLE ALSO HAVE.... YES .... NIGHTMARE.

SHORTLY WE ARE IN MATRI-X CHRIS AND WE ARE TRAPPED. BUT EXIT REALLY EXIST AND NEVER CLOSED FOR THOSE WHO WANT TO TRY OWN WAY OUT.

 

THE TRIPLEX reality

1. BODY - THE HARDWARE "unwilling gift" from MATRI-X

2. SOUL - OPERATING SYSTEM FOR BODY "unwilling gift" from MATRI-X

3. SPIRIT - SELF AWARENESS. It is only, we are. → MIGHTIEST POWER IN ALL UNIVERSES.

 

Best wishes

Aloha

  • Liked by
  • Chris
Show More Posts
Close