02 November 2017
- Last edited 02 November 2017
For all that have done the Mr Preva Experiment, we should be very familiar with this schematic.
Electrical Energy, Kinetic Energy, is the Product of Voltage (Potential Difference) and Current (6.24 x 1018 Electrons per second). It is this movement of charged particles from point A to point B, a Current, this is the requirement to be Kinetic Energy!
This is a huge number, absolutely massive: 6,240,000,000,000,000,000
This value, 1 Amp at 1 Volt is 1 Coulomb. So, enough of the statistics, lets look at the gritty stuff.
Because Electrical Energy is the Product of Voltage and Current, we need to do two things:
- Increase Voltage
- Increase Current
Both we know how to do already!
- Transform Voltage, step it up using Turns Ratio
- Increasing Current is done in The Mr Preva Experiment (Non Inductive Coils at Resonance) (Magnetic Resonance, where each Current is 180 degrees out of phase)
Non Inductive turns out to be extremely Inductive when one knows what Science chooses to remain Ignorant on!
Remember, the Current is dependant on Voltage. The Potential difference between two Terminals! Increasing the Voltage, will also increase the Current by an order of magnitude.
But we do not wish to pay for it. So we must be smart, must incorporate both techniques above at the same time!
EDIT: In some Circuits, an Earth may be needed, like Kapanadze, because there is 1/4 Wavelength, but not always.